Roland Blade 2.5 mm Diameter is a precision replacement blade designed for compatible Roland-style cutting plotters. Its specialized dimensions support controlled cutting, clean contours and stable performance with correctly matched media.
Features
- Specialized Roland-compatible blade configuration.
- Precision-ground edge supports clean and accurate contour cutting.
- Durable construction provides stable performance in routine production.
- Suitable for correctly matched vinyl, film, label and sign-making media.
Selection and Use
Confirm the blade diameter, holder interface and target material before ordering. Use minimal blade exposure and perform a test cut to adjust pressure, speed and cutting offset.
Product Description
- Category: RO(A)-Roland Blade(A).
- Product: 2.5 mm diameter Roland blade.
- Product type: Precision cutting plotter replacement blade.
- Selection: Match the blade dimensions and holder interface to the equipment.
Roland Blade 2.5 mm Diameter Applications
Roland Blade 2.5 mm Diameter is designed for compatible Roland cutting systems used with paper, film, labels and sign materials. Confirm the machine model, holder interface, blade angle and material thickness before fitting. Consult the Roland DG official website and the equipment manual for machine-specific settings.
Compatibility And Setup Checklist
- Verify the 2.5 mm diameter and holder interface before ordering.
- Set blade exposure to the minimum effective depth for the selected material.
- Run a test cut to tune pressure, speed and offset before production.
- Keep the cutting strip and holder clean to maintain stable tracking.
Cutting Results And Maintenance
Sharp edges, clean media and controlled pressure help produce smooth corners and small lettering. Inspect the tip and holder regularly, remove adhesive residue and replace the blade when drag marks, lifted corners or ragged details appear. Store unused blades capped and dry.
Ordering And Safety Notes
Provide the machine model, holder type and Roland Blade 2.5 mm Diameter specification when requesting a replacement. Handle the cutting edge with care, use eye protection and discard worn blades in a sharps container. General workplace guidance is available from OSHA.
Roland Blade 2.5 mm Diameter FAQ
What materials are suitable?
Compatible workflows commonly include paper, film, label stock and sign materials. Actual performance depends on the machine, holder, blade angle and material construction.
How do I prevent liner damage?
Start with low pressure and minimum blade exposure, then increase settings gradually after a test cut confirms clean face-material separation.
When should I replace the blade?
Replace it when cutting force rises or the test cut shows ragged lettering, lifted corners or inconsistent depth.
For compatible tooling requests, visit JEEFOO cutting-tool support.
