Bench Drill Bottom Cleaning Cutter With Center Drill 12 combines a bottom-cleaning profile with a center drill to establish a centered hole while machining a controlled recess in compatible wood blanks. The integrated arrangement helps align the workpiece and cutting path during small-part woodworking, provided that the tool, holder and blank are rigidly secured.
Bench Drill Bottom Cleaning Cutter Features
- Bottom-cleaning geometry supports flat and controlled recess machining.
- Center drill assists initial positioning and centered hole formation.
- Model 12 configuration for correctly matched applications.
- Designed for compatible bench drills with rigid workholding.
- Suitable for solid wood and other approved craft materials.
Applications and Tool Selection
The Bench Drill Bottom Cleaning Cutter is intended for woodworking tasks that require a centered pilot hole together with a cleaned recess or shaped cavity. Typical work includes decorative components, craft blanks and repeatable small-batch parts. The actual finished result depends on the cutter profile, material, spindle condition, setup accuracy and feed technique.
Before ordering, confirm the model, shank interface, cutting dimensions, center-drill size and required recess geometry. Compare those details with the bench drill, chuck or collet and available clearance. If a standard model does not match the target part, provide a dimensioned drawing, sample image or finished-product specification for technical review.
Setup and Test-Cut Procedure
Begin with a straight, dry blank that is free from cracks, loose knots and embedded metal. Mark the center, choose a fixture that supports the small part from all necessary directions and confirm that clamps cannot contact the rotating tool. Clean the shank and holder before installation, then check that the cutter runs true without visible wobble.
- Disconnect power while installing or inspecting the cutter.
- Seat the shank correctly and tighten the approved holder.
- Align and clamp the blank before starting the spindle.
- Make a light trial cut on scrap from the same material.
- Inspect the recess, center hole and surface finish before production.
Feed the Bench Drill Bottom Cleaning Cutter gradually and avoid forcing it into the workpiece. Excessive pressure can increase heat, vibration and surface tearing. If cutting quality changes, stop the machine and inspect the edge, spindle, holder and fixture. Never measure the part, clear chips or reposition the blank while the spindle is moving.
Cut Quality and Repeatability
Repeatable results require consistent blank dimensions, center marking, clamping pressure, spindle speed and feed depth. Use a depth stop or appropriate fixture when multiple parts must share the same recess. A sharp edge and stable spindle help reduce burning and torn grain, while progressive passes provide better control than a single heavy cut.
Wood density and grain direction can affect the surface left by the Bench Drill Bottom Cleaning Cutter. Test each new material before committing to a production batch. Adjust only within the safe operating range of the machine and tool, and record successful settings for later jobs.
Safety, Cleaning and Storage
Use suitable eye and dust protection, keep guards in place and follow recognized woodworking machine safety guidance. Small blanks require especially secure workholding; they must never be held by hand near a rotating cutter. Keep clothing, hair and loose items away from the spindle area.
After use, remove resin and dust with a method suitable for the tool material, dry the cutter and inspect the cutting edge, center drill and shank. Store the tool so its edge cannot strike other metal parts. Regular care helps preserve cutting quality and makes damage easier to identify before the next setup.
Guangzhou, Guangdong Supply Support
JEEFOO Tools supplies the Bench Drill Bottom Cleaning Cutter from Guangzhou, Guangdong, China, with selection, customization and export support for woodworking-tool buyers. Explore related JEEFOO woodworking cutting tools, or send the team your machine details, workpiece material and target dimensions for review.
Product Description
- Category: Bench Drill-Bottom Cleaning Cutter With Center Drill.
- Model: 12.
- Product type: Woodworking bottom cleaning cutter with center drill.
- Equipment: Compatible bench drill or fixed drilling machine.
- Selection: Confirm the profile, dimensions, shank and workholding method before ordering.
