Bench Drill Star Moon Seed Cutter D6 D12 3.175 mm Shank is a profiled woodworking tool designed for shaping star-and-moon seed beads and related decorative components on compatible bench-drill equipment. The D6 reference profile, 12 mm cutting diameter and 3.175 mm shank support precise small-part machining when used with the correct holder and controlled feed.
Bench Drill Star Moon Seed Cutter Features
- D6 reference size with a 12 mm cutting diameter.
- 3.175 mm shank for correctly matched tool holders.
- Profiled cutting edge supports controlled decorative bead shaping.
- Custom non-standard and R-profile versions may be available.
- Suitable for compatible bench drills and securely clamped wood blanks.
Applications and Selection
The Bench Drill Star Moon Seed Cutter is intended for decorative wooden beads, craft components and repeatable star-and-moon profile work. Before ordering, confirm the required finished shape, material, cutting diameter and shank compatibility. For custom work, provide a drawing, sample or clear dimensions so the cutter profile can be reviewed against the intended result.
Operating Guidance
Confirm the shank size, cutting diameter, spindle speed and rotation direction before use. Secure and center the workpiece, feed gradually and test on scrap material. Keep hands clear of the rotating tool, use suitable eye and dust protection, and follow recognized woodworking machine safety guidance. Inspect the cutting edge and holder before every production run.
Guangzhou, Guangdong Tool Supply
JEEFOO Tools supplies the Bench Drill Star Moon Seed Cutter from Guangzhou, Guangdong, China, with product-selection, customization and export support for woodworking-tool buyers. Explore more JEEFOO woodworking cutting tools, or contact the team with your machine, workpiece material and target dimensions.
Workpiece Preparation and Test Cutting
For the Bench Drill Star Moon Seed Cutter, consistent results begin with a straight, dry and securely held blank. Check the wood for cracks, loose knots, embedded metal and uneven surfaces before machining. Mark the intended center and confirm that the clamping method keeps the blank stable without obstructing the cutter. A short trial cut helps verify the finished profile, hole alignment and feed direction before a full batch is started.
Use light, progressive passes instead of forcing the cutter into the material. Excessive feed pressure can increase heat, vibration and surface tearing. If the cut becomes rough, stop the machine and inspect the edge, workholding and spindle condition. Do not adjust the blank, clear chips or measure the profile while the spindle is moving.
Machine Compatibility Checklist
- Verify that the chuck or collet safely accepts the 3.175 mm shank.
- Confirm adequate clearance for the 12 mm cutting diameter.
- Check spindle runout and holder cleanliness before installation.
- Choose a speed and feed suitable for the wood species and profile.
- Use a rigid fixture that keeps small parts controlled throughout the cut.
Care, Storage and Custom Profiles
After using the Bench Drill Star Moon Seed Cutter, remove resin and dust with a method suitable for the tool material, dry the cutter and store it so the edge cannot strike other metal parts. Regular inspection helps identify wear, chipping or shank damage before those conditions affect the workpiece. A clean holder and undamaged shank also support stable rotation and repeatable decorative profiles.
When a standard Bench Drill Star Moon Seed Cutter does not match the target bead, JEEFOO can review non-standard profiles, including R-shaped variants. Buyers should provide the finished bead drawing, key diameters, material, machine interface and expected quantity. Clear technical information makes it easier to confirm feasibility, select an appropriate geometry and reduce unnecessary sampling.
Product Description
- Category: Bench Drill-Star Moon Seed Cutter.
- Reference size: D6.
- Cutting diameter: 12 mm.
- Shank diameter: 3.175 mm.
- Customization: Non-standard and R-profile options can be discussed.
