AAAx6xD5x14Hx50L Aluminum Single Blade Cutter is a precision cutting tool designed for aluminum cutting, profiling, trimming and smooth single-edge machining. Its geometry supports stable machining and efficient chip removal in aluminum and compatible non-ferrous materials.
Aluminum Single Blade Cutter Features
- Cutting geometry designed for aluminum and compatible non-ferrous materials.
- Sharp, precision-ground edges support a clean machined finish.
- Efficient chip evacuation helps reduce recutting and heat buildup.
- Suitable for CNC routers and machining centers with correct toolholding.
- Standard dimensions and customized cutting-tool designs are available.
Applications and Cutting Guidance
The AAAx6xD5x14Hx50L model is suitable for aluminum cutting, profiling, trimming and smooth single-edge machining. Confirm workpiece alloy, machine rigidity, tool runout and clamping before production. Use suitable lubrication or cooling and test conservative parameters on a new material.
- Use a clean collet or tool holder that matches the shank.
- Keep tool overhang as short as the machining depth permits.
- Select feed rate, spindle speed and depth according to the alloy and cutter size.
- Maintain effective chip evacuation throughout the cut.
- Replace worn or damaged tools before continued machining.
AAAx6xD5x14Hx50L Aluminum Single Blade Cutter Overview
An aluminum single blade cutter uses one cutting edge and a large flute space to remove aluminum chips efficiently. The AAAx6xD5x14Hx50L specification combines a 6 mm shank, 5 mm cutting diameter, 14 mm cutting height and 50 mm overall length for compatible CNC routers and machining centers.
Key Features and Buyer Benefits
- Single-edge geometry creates generous chip space for aluminum machining.
- 5 mm cutting diameter supports profiles, slots and detailed components.
- 6 mm shank fits a compatible clean precision collet.
- 14 mm cutting height provides practical depth for controlled passes.
- 50 mm overall length balances reach and rigidity for suitable machines.
CNC Aluminum Applications
This aluminum single blade cutter can be used for profile cutting, slotting, pocketing, trimming and finishing of compatible aluminum alloys. Typical work includes signs, panels, brackets, enclosures, fixtures, prototypes and customized components. Actual performance depends on alloy grade, tool engagement, spindle power, machine rigidity and cooling method.
Use controlled passes when removing a large amount of material and leave a consistent finishing allowance when edge quality is important. Smooth tool paths and a suitable lead-in reduce sudden cutting load. A separate finishing pass can improve dimensions, reduce visible tool marks and help control burr formation on thin or detailed parts.
Machine Setup and Cutting Recommendations
Clean the collet and shank, minimize overhang and check spindle runout before production. Secure the workpiece firmly and begin with conservative spindle speed, feed rate and pass depth. Inspect chip shape, cutting sound, heat and surface quality, then adjust one parameter at a time and record the approved settings.
Effective chip evacuation is essential because recut aluminum can create heat and built-up edge. Air blast, mist lubrication or another suitable method may help when allowed by the machine and workplace rules. Avoid dwelling. Consistent setup helps the same aluminum single blade cutter reproduce approved results on repeat orders.
Carbide Inspection and Tool Life
Carbide grade, grinding quality and edge preparation influence rigidity and service life. Buyers can review the general properties of tungsten carbide when comparing wear resistance. Inspect the cutting edge before each job and replace a chipped, bent or heavily worn cutter.
Clean aluminum residue using an appropriate workshop method, keep the tool dry and store it in a protective case. Prevent the cutting edge from touching other tools during transport. A documented inspection routine helps workshops compare tool life, cycle time, burr formation and finished-part quality.
JEEFOO Supplier in Guangzhou, China
JEEFOO supplies CNC aluminum cutting tools from Guangzhou, China for distributors, workshops and manufacturers. Send the alloy, drawing, machine details, required dimensions, quantity and packaging needs for selection support. Browse more JEEFOO CNC router bits for related aluminum applications.
Frequently Asked Questions
What is an aluminum single blade cutter used for?
It is used for routing, profiling, trimming, pocketing and slotting aluminum where efficient chip evacuation and a clean edge are required.
Can JEEFOO provide custom specifications?
Yes. Provide the alloy, drawing, machine, required dimensions and quantity. The Guangzhou team can review a standard or customized aluminum single blade cutter.
Product Description
- Series: LD – Aluminum Single Blade Knife.
- Product: Aluminum Single Blade Cutter.
- Application: Aluminum and non-ferrous CNC machining.
- Machining: Cutting, routing, profiling, engraving or finishing according to tool geometry.
- Customization: Non-standard dimensions and cutter profiles are available.
Size: AAAx6xD5x14Hx50L
